Shunxin Fertilizer Machine & Production Line

How to increase the output of disc granulator?

1.Controlling the water content
According to the characteristics of the powder: composition, fineness, viscosity, humidity, temperature, etc., the moisture content of the particles should be controlled at 30 %~ 28%. If the water content is too small, it is difficult to form balls, and the output is low. Too much water content will cause many large balls. And the ball surface is sticky, which is easy to block the screen surface.
How to preliminarily check the amount of water in the pellets during the production process: A handful of balled materials can form a ball in the hand, and you can loosen it by touching it with your fingers.

2.Strictly controlling the quality of powder
Carefully check the quality of various raw materials according to the formula of the fertilizer. It is strictly forbidden to have iron blocks, stone blocks larger than 10mm, and wooden blocks larger than 10mm when raw materials are discharged and fed. Rice bran and sand can be no more quality indicators, and too many will seriously cause low yield.
3.Operating the disc pelletizer skillfully
Do a good job in technical training for employees and improve their technical quality and operational skills.
The disc fertilizer granulator adopts the integral circular arc structure, and the granulation rate can reach more than 93 %. We also have other kinds of granulators. Welcome to contact us for details.



Leave a Reply