Shunxin Fertilizer Machine & Production Line

How to improve the granulation rate of the disc granulator?

The disc granulator uses the cohesive force of the material itself to rotate in an inclined disc to make the material stick together little by little, so that the material becomes granules. This granulation method is relatively simple and requires the moisture of the material to be 50-60%. Otherwise, the success rate of material granulation will be greatly reduced. Some materials with poor adhesion are not easy to be made into pellets.

Organic and inorganic compound fertilizers contain a lot of organic matter with loose texture, so the bonding between materials is not strong. The moisture content is less than 40%, and the granulation forming rate of the disc granulator will be low. At this time, it depends on the control ratio of material and moisture. According to theoretical data, the water content of the pellets of the disc granulator is about 25% to 30%. If the water content is not much, the output will be low and the difficulty coefficient of pelletizing will increase. If the water content is too large, the surface of the ball is prone to sticky each other, which will affect the production. Moreover, it is also necessary to train the workers in production. This can increase the efficiency of the disc granulator.
Due to the advantages of high granulation rate, large hourly output, stable operation, sturdy and durable equipment, and long service life, the disc granulator has been selected as the ideal granulating equipment by the majority of users. Welcome to contact us for details.



Leave a Reply