Shunxin Fertilizer Machine & Production Line

Causes of roll sticking in double-roll extrusion granulator

During the use of the double-roll extrusion granulator, it is inevitable to encounter various problems. Among them, the most trouble is the material sticking to the roller in the granulation of the double-roll extrusion granulator. Let us introduce the reasons and solutions for material sticking rollers:
Reason 1: The material contains too much moisture
Solution: reduce the moisture content of the material. Generally, the moisture content should be controlled about 5% .
Reason 2: The pressure strength of the billet is not enough
Solution: reduce the gap between the two rolls of the double-roll extrusion granulator, and generally control it between 0.3-1mm.

double-roll extrusion granulator
Reason 3: The surface of the new nest of the double-roll extrusion granulator is rough
Solution: Run the roller extrusion granulator, add abrasives and grind the roller skin.
Our double-roll extrusion granulator is complete in specifications and quality, and all indicators meet or exceed national standards. Different models and configurations is different price. Welcome to contact us for details.



Leave a Reply